Products
ATLI 12″ INSET APPROACH LIGHT
ATLI-12-Inch-Inset-Approach-Light
Related Standards
  • FAA AC 150/5345-46 L-850E
  • ICAO Annex 14 Vol. I Para. 5.3.4
  • IEC TS 61827
  • STANAG 3316
Applications
  • As unidirectional high intensity approach centerline, crossbar and side row light in CAT I, II & III conditions
Important Features
  • ETL Certified
    (L850E-ATLI-3-2-48G)
  • IEC TS 61827 Certified
  • Member of an extensive range of FAA Approved 12 inch diameter inset lights
  • Equipped with two or three 105 W 6,6 A halogen pre-focused dichroic reflector lamps.
  • Long lamp life 1000 hours at full intensity (6.6 A) increases to 2000-4000 hours in practice as the light usually operates at lower intensities.
  • Needs very little maintenance with its aluminium body and optics, high temperature resistant wiring, gasket and front glass and stainless steel screws
  • Lamp can be changed from the back easily without removing the reflector and front glass, no special equipment is needed.
  • Optical adjustment is done easily by two screws.
  • Low rising smooth outer surface
  • Can be installed directly on a 12 inch shallow base, on a L-868 Size B deep base or by means of an adapter ring on a L-868 Size C deep base
ATL (A-1200) Catalog
Yesilce Mah. Aytekin Sok. No:7 34418
Kagithane/Istanbul TURKEY
+90 212 279 51 59-60
Copyright © 2024, Ema Tesisat A.S. All rights reserved.